Westermo EDW-100 Guide de l'utilisateur télécharger pdf (Page 22)

LED Status Description

PWR OFF No internal power

ON Internal Power OK

TD OFF No serial data transmitted from the unit,

(RS-232 or RS-422/485)

ON Serial data transmitted from the unit, (RS-232 or RS-422/485)

RD OFF No serial data received to the unit, (RS-232 or RS-422/485)

ON Serial data received to the unit, (RS-232 or RS-422/485)

RTS OFF No RTS to the RS-232 interface or RS-422/485 transmitting.

ON RTS to the RS-232 interface or RS-422/485 receiving.

CTS OFF No CTS from the RS-232 interface

ON CTS from the RS-232 interface

LINK OFF No Ethernet link.

Cable not connected.

ON Good Ethernet link.

Flash Ethernet data is transmitted or received, traffic indication.

STAT OFF Normally Off

ON Telnet session established to Telnet diagnostics service or

Ongoing configuration by Web tool

RC OFF DIP switch settings are valid.

ON One or more DIP switches are overrid by remote configuration

SPD ON Ethernet 100 Mbit/s

OFF Ethernet 10 Mbit/s

DPX ON Full duplex

OFF Half duplex

6616-2202

LED Indicators

Power

Transmit data

Receive data

Request to send

Clear to send

Status

Remotely controlled

Speed Integrated in RJ-45

Green

Duplex Integrated in RJ-45

Ye l l o w

Ethernet

Ethernet TX connection (RJ-45 connector), automatic MDI/MDI-X crossover*.

Contact Signal Name Direction Description/Remark

1 TD+ In/Out Transmitted/Received data

2 TD– In/Out Transmitted/Received data

3 RD+ In/Out Transmitted/Received data

4 NC

5 NC

6 RD– In/Out Transmitted/Received data

7 NC

8 NC

Shield HF-connected

CAT 5 cable is rec-

ommended.

Unshielded (UTP) or

shielded (STP) con-

nector might be used.

* Depend of settings on S1; 6, 7 and 8.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

Westermo EDW-100 Guide de l'utilisateur Page 22

Commentaires sur ces manuels