Westermo EDW-100 Guide de l'utilisateur télécharger pdf (Page 13)

6616-2202

Diagnostics via Telnet

The EDW-100 provides the user with diagnostics information via a Telnet connection

on port 23.

Information presented to the user is:

… Operational mode (UDP, TCP-server or client)

… Operational status (Listening for connection (TCP server), connected to host

(TCP server or client), Attempting to connect (TCP client))

… The ‘Status’ LED on the EDW-100 will lit during Telnet session.

Below is an description of how to start a Windows Telnet session and get diagnostics

information from the EDW-100.

C:\WINDOWS\System32\telnet.exe

Welcome to Microsoft Telnet Client

Escape Character is 'CTRL+]'

Microsoft Telnet> o 169.254.100.100

1. Start a Telnet session.

2. Connect to EDW-100 by typing ‘o 169.254.100.100’

or the configured IP address of the EDW-100.

3. Login using default username and password

(or your customized settings if configured).

Application modes

The EDW-100 can be setup for use in one of four different application modes:

… TCP Server … TCP Client … UDP … Modbus gateway

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Pas de commentaire

Westermo EDW-100 Guide de l'utilisateur Page 13